Need Sleep...

Well I spent most of the weekend in the shop.  Finished the battery box, and painted it.  Went out and got most of the hardware and wiring supplies that I needed.  Threw the old harness on the bike and hooked it up to make sure everything was working.  Cut all of the old harness out and made my own harness matching it.  Took longer than I wanted but I hate wiring.

Checked for spark and it was getting it.  Threw some gas in it and took it outside and it fired up second kick!!  Warmed it up and shut it down.  Let it cool as I worked on it more finishing some things up.  Then I just took it out for a spin around the block.  Felt pretty good.  Clutch needs to get broken in some, and the carbs are acting funny.  I think my fuel lines are feeding quite right.  That and i have to  balance the carbs better. 

But the thing scoots!  Have to take it out again after work tomorrow and work some more bugs out of it...

Here are some more pics.... almost there..

ELECTRONICALS Part 2.

Well I finished drilling some holes in the battery box for the reg/rectifier.  And welded a bracket on the front of the batt box to mount the stock ignition switch to. 

Finally got the new bars, grips, and air filter in the mail.  Should have the tailight tomorrow....

Also got the ignition module wired in, and mounted the coil under the tank.  Ignition is wired, just have to solder some wires to the alternator and set up some ground wires and it will be ready to start.  Gonna buy some oil tomorrow and shoot for getting it running this weekend. 

ELECTRONICALS

Well spent quite a while in the shop last night getting the battery box a little farther along.  Gotta fit it a few more times and get it mounted.  The start the wiring... getting closer and closer.

 And here are a few more pics of the seat that i was working on for the past couple weeks.  Just another picture of it on the an actual bike.

Munday

Got into the shop tonight to start work on my battery box for the xs 650.  Forgot to bring the clamps for my sheet metal brake... have to finish welding the box up tonight... shouldnt take long. 

Ordered some more parts today too... should have this bike on the road in the next week or two... (crosses fingers)

 Also got Han's bike into the shop to fix a few seals and put new exhaust and filters etc on it...

One of my next projects... 70s Triumph Bonneville... Need a 650 bonneville motor for it if anyone knows where one is?

Riding Season!?

Got the Kawasaki out of the shop today and back in its summer resting place... my busted garage... Feels good to get back out and riding...

The rain in the next few weeks should be a perfect opportunity to get the Yamaha running and on the road so I can finish my plans for the Kawasaki! 

New Seat Finished

Seat is almost finished.  Just some finishing work on the underside and its done!