Friday, June 28, 2013

Triumph Bonneville

Finally getting to work on this Triumph Bonneville some more.  Have alot of tabs and holes in the frame that need to be welded up and smoothed out.  Also the peanut tank I bought sits way too low in the tunnel.  The tank was hitting the top of the engine and doesnt flow at all with the bike.  I needed to raise the tank almost two inches... Cut weld smooth repeat... Came out pretty good, but will need a good skim coat of bondo... 

If anyone is planning on welding one of these tanks be careful!  Metal is dangerously thin!